Misting Nozzle Spraying

Misting nozzles create a very fine mist or fog. Droplets are typically small enough that buoyancy is significant compared to gravity, allowing drops to appear to float. In actuality, in the absence of upward airflow particles are simply falling very slowly. The higher the pressure, the smaller the droplets. In cases of lower pressure, a larger number of smaller flow nozzles may be required.

  • L Spiral Evaporative Cooling Nozzles, Humidification Nozzles, Coating Nozzles, Low Flow Nozzles
    View Cart
    Details

    L Spiral Evaporative Cooling, Humidification, Coating, Low Flow Nozzles

    L Nozzles

    • A series of small spiral nozzles with orifice diameters of 0.04" (1.02 mm) to 0.12" (3.05 mm)
    • Male connection
    • Spray Pattern of the L Evaporative
    • Cooling Nozzle: Hollow Cone Fog, nearly as fine as  P series
    Common Materials:
    303, 310, 316, 317L, 321, 347, Brass, Nickel Alloy C-22, Nickel Alloy C-276, PTFE
  • MicroWhirl (MW) Nozzles Atomising, Evaporative Cooling, Misting, and Fogging Nozzles
    View Cart
    Details

    MicroWhirl (MW) Nozzles

    MicroWhirl® (MW) Nozzles atomising, evaporative cooling, misting, and fogging nozzles

    • Outstanding atomization
    • Rugged pinless design
    • Drip-free performance
    • 70 micron polypropylene filter
    • Safety wire hole available
    • U.S. Patent #7198201
    • Minimum operating pressure 100 psi (7 bar)
    • Mist at low pressure; fog at high pressure
    Common Materials:
    303, 316, Nickel Alloy C-276
  • View Cart
    Details

    P Evaporative Cooling, Fogging, and Misting Nozzles

    P nozzles

    Design Features

    • High energy efficiency
    • No whirl vanes or internal parts
    • Highly efficient laminar jet impinges on target pin generating fine fog
    • Male connection

    Spray Characteristics

    • Finest fog of any direct pressure nozzle
    • Produces high percentage of droplets in the 25-400 micron range; ideal for dust suppression
    Common materials:
    303, 310, 316, 321, 347, Brass, Nickel Alloy C-276

  • PJ Nozzles Impingement, Small, Fog, and Misting Nozzles
    View Cart
    Details

    PJ Impingement, Small, Fog, and Misting Nozzles

    PJ Nozzles

    Design Features

    • High energy efficiency
    • No whirl vanes or internal parts
    • 1/8" or 1/4" male connection
    • 100-mesh screen, 20 micron paper filter or 70 micron polypropylene filter optional

    Spray Characteristics

    • Finest fog of any direct pressure nozzle
    • Produces high percentage of droplets under 50 microns
    Common Materials:
    303, 310, 316, 321, 347, Brass, Nickel Alloy C-276
  • SS-Small-Droplet-Size-Dense-Fog-Nozzles-min
    View Cart
    Details

    SS Small Droplet Size Dense Fog Nozzles

    Nozzle Features

    • Multiple flat fan patterns
    • Flow rates from 9.16 L/Min to 618 L/Min
    • Solid one-piece construction
    fog_SS-min
    Download SpecSheet
  • UltiMist (UM) Nozzles Fogging and Misting Nozzles
    View Cart
    Details

    UltiMist (UM) Fogging & Misting Nozzles

    UltiMist (UM) nozzles

    Metal:

    • 416 stainless steel tip
    • Brass body
    • 1/8" and 1/4" sizes
    • Male or female connections
    • Integral 100 mesh strainer

    Plastic:

    • All plastic (Polyacetal) construction
    • 1/8" male connection
    • Very fine, fog-like mist
    • Produces high number of droplets under 60 microns
    Common Materials:
    Brass / 416, Polyacetal

Title

©2023 Spray Nozzle Engineering | All Rights Reserved | T&C