Nozzle Features
- External mix: allows spraying of viscous materials
- Flow rates from 522 L/hr to 1158 L/hr
- Variable atomisation
- Precise metering of the liquid flow rate
-
-
Design Features
- Three-piece construction
- Interchangeable spray tips
- Integral strainer available
- Male and female connections
Spray Characteristics
- Relatively coarse atomisation
- Uniform distribution with tapered edges for use in overlapping sprays
- Common materials
- 303, Brass, 316
-
Design Features
- Nozzles can be changed in seconds without tools
- Three part nozzle, base, gasket and interchangeable tip
- Exclusive ramped engagement for efficient, automatic alignment
- Threaded adaptors willl accommodate other standard BETE nozzles. Shut-off plugs are also available
- Sanitary EZs are available with weld connection and no knurling
- Common materials
- 303, 316, Brass
-
Key Features
- The simple and maintenance-friendly design allows for disassembly, inspection/cleaning, and reassembly with basic hand tools
- Two fluid ports are standard; a plug to seal the recirculation port is included.
- Air Cylinder Pressure: Minimum: 30 psi; Maximum: 250 psi.
- Operating Temperature Range: -15 °F to 400 °F. Nylon Mounting Hardware: 250 °F MA
- Air Cylinder: Stainless Steel, Anodized Aluminum, PTFE, and Viton®
- Fluid Seals: FDA-compliant Viton®
- Air Cylinder: Single-acting spring extends type. Air pressure retracts the rod and allows flow through the nozzle. Removing air pressure extends the rod and seals the nozzle.
- A Double-acting cylinder is available upon request.
- Frequency Rating: Up to 180 cycles/minute, with an appropriate solenoid valve (Cv=0.08 minimum).
Design Features
- Provides a controlled intermittent liquid spray using only liquid pressure as the force for atomization.
- Drip-free performance.
- Pneumatically actuated for crisp on/off spray
- Straight through porting for fluid recirculation
Spray Characteristics
- Relatively coarse atomization
- Uniform distribution with tapered edges for use in overlapping sprays
-
MicroWhirl® (MW) Nozzles atomising, evaporative cooling, misting, and fogging nozzles
- Outstanding atomization
- Rugged pinless design
- Drip-free performance
- 70 micron polypropylene filter
- Safety wire hole available
- U.S. Patent #7198201
- Minimum operating pressure 100 psi (7 bar)
- Mist at low pressure; fog at high pressure
- Common Materials:
- 303, 316, Nickel Alloy C-276
-
NFD Nozzles
- Dovetail joint guarantees alignment of interchangeable tips
- Dimensionally compatible with standard dovetail systems
- Tips offset 5° or 15° for overlapping spray patterns
- Tapered overlapping spray provides uniform coverage
- Male, female and welded connections
- Other sizes available upon request
- Common materials
- 303, 316, Brass
-
- One-piece construction
- No internal parts
- Male connection
- Low nozzle maintenance
- Optional removable strainer for easy cleaning
- High impact
- Uniform distribution
- Common materials
- 303, Brass, 316
