CW nozzles
Design Features
- Standard three-piece construction
- Optional 50- or 100-mesh strainer
- Protective cover available
- Male and female connections
- Interchangeable spray tips
- Common Materials:
- 303, 316, Brass
Full cone nozzles produce a solid circle of spray via a conical shaped pattern. These nozzles are used when the objective is to distribute the fluid evenly over an area, rather than over a concentrated line or a hollow-ring shaped area, and range in droplet size from finely atomised droplets to large rain sized droplets.
-
-
EZTF nozzles
Design Features
- Nozzles can be changed in seconds without tools
- Three part nozzle, base, gasket and interchangeable tip
- Exclusive ramped engagement for efficient, automatic alignment
- Threaded adaptors will accommodate other standard BETE nozzles. Shut-off plugs are also available
- Sanitary EZs are available with weld connection and no knurling
-
EZWL nozzles
- Nozzles can be changed in seconds without tools
- Three part nozzle, base, gasket and interchangeable tip
- Exclusive ramped engagement for efficient, automatic alignment
- Threaded adaptors willl accommodate other standard BETE nozzles. Shut-off plugs are also available
- Sanitary EZs are available with weld connection and no knurling
- Common Materials:
- 303, 316, Brass
-
MaxiPass low flow (MPL) nozzles: Low flow maximum free passage full cone nozzles
- Ultimate clog-resistant design with largest free passage available in a full cone nozzle
- Two unique S-shaped internal vanes, as opposed to x-vane style nozzles, allow maximum free passage of particles
- High energy efficiency
- Easily handles dirty, lumpy liquids
- Male connections
- High reliability spray performance under the most difficult conditions
-
MaxiPass (MP) full cone nozzles: Clog resistant nozzles, and fire protection spray nozzles, maximum free passage
Design Features:
- Ultimate clog-resistant design with largest free passage available in a full cone nozzle
- Two unique S-shaped internal vanes, as opposed to x-vane style nozzles, allow maximum free passage of particles
- High energy efficiency
- Easily handles dirty, lumpy liquids
- Male and female connections
- Flanged connection available
- High reliability spray performance under the most difficult conditions
-
NC nozzles
- High flow rates with coarse atomisation
- Reliable, uniform coverage
- Manufactured in chemical-resistant plastics and some bar stock metal alloy materials
- Lightweight and rugged
- Made in the USA
- Can be customized to a particular flowrate and angle
- Male, female, and flanged connections available
- Wide range of flow rates and spray angles available
- Wide range of connection sizes and connection types available
- High flow rates with coarse atomisation
- Common Materials:
- Polypropylene, PTFE, PVC
-
Nozzle Features Large internal passage Flow rates from 350 L/Min to 19700 L/Min Uniform spray coverage High flow rates with coarse atomisation Variety of polymer and metal alloy materials available, offering high corrosion resistance
-
NCK nozzles
- Narrow spray angles
- High velocity
- Male and female connections
- Flanged connections available
- Coarse and extremely hard-driving spray with even distribution
- Common Materials:
- 316, Brass, Polypropylene, PTFE, PVC
-
NCS nozzles
- Takes no more room than pipe plug, yet performs like full-size nozzle
- Small projection
- Can be used with standard pipe couplings to form female nozzle, with elbows to form right angle nozzle, or with tees or crosses for multiple installations
- Male connection
- Metal and plastic materials
- Common Materials:
- 316, A494 CU5MCuC (cast Nickel Alloy 825), A494 CW2M (cast Nickel Alloy C-276), A494 CW6MC (cast Nickel Alloy 625), A494 CX2MW (cast Nickel Alloy C-22), Brass, Duplex 2205, Polypropylene, PTFE, PVC
-
Whirl Spray Nozzles
Whirl nozzles generate a whirling motion of the liquid. Axial whirl nozzles produce the swirling motion with an internal vane or disc. Tangential whirl nozzles feature a slight angle on inlet passageway into the cavity of the nozzle. The swirling effect within the body cavity creates the whirling motion.- The Axial Whirl full cone nozzle style is ideal for even distribution over a packed bed.
- The Axial Whirl full cone nozzles are used for rain simulation and foam control applications.
- Spillback nozzles provide a 10:1 turndown ratio with minimal change in drop size.
-
SC nozzles
Design Features:
- Complete line of full cone nozzles made in cast metal alloys
- Internal removable vane
- Male and female connections
- Flanged connections available
Spray Characteristics:
Full Cone with uniform distribution- Common Materials:
- 316, Brass, Carbon Steel
-
-
ST nozzles
- Designed for use with abrasive materials such as limestone slurry
- Extensive history as a wet FGD (flue gas desulphurisation) absorber nozzle
- Available in cobalt alloy 6 or industrial ceramic (reaction bonded silicon carbide)
- Inherently clog resistant with no internal parts
- The spiral design produces a spray with more developed surface area than other nozzle styles for a given flow and pressure
- Designed by BETE, the inventor of the spiral nozzle
- Cobalt alloy 6 or RBSC ceramic parts in high-wear areas
- High energy efficiency
- No internal parts
- Clog-resistant
- Male and female connections
- Flanged and special connections available as required
- Fine atomisation
-
STXP Nozzles
- Abrasion resistant
- Cobalt alloy 6 or RBSC ceramic parts in high-wear areas
- High energy efficiency
- Largest free passage in spiral design
- Extra-heavy, rugged construction
- Male and female connections
- Flanged and special connections available as required
- Fine atomisation
- Common Materials:
- 316 / Cobalt Alloy 6, 316 / RBSC
-
TC nozzles
- One-piece body with integral vanes
- Male, female and flanged connections available
- Extremely high flow rates
- Common Materials:
- 316
-
TF Nozzles: Spiral spray, fogging, misting, and evaporative cooling nozzles in a wide range of flows and angles; full cone nozzles, hollow cone nozzles, misting nozzles
Non-clogging nozzles: TF Spiral Spray Nozzle
- The original spiral nozzle invented by BETE
- Also referred to as pigtail nozzles, corkscrew nozzles and/or helix nozzles
- High energy efficiency
- One-piece/no internal parts
- Clog-resistant performance
- High discharge velocity
- Male connection standard; female connection available by special order
- The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
- Wide range of flow rates and spray angles
- Fine atomisation
-
TFXP nozzles
Largest free passage, full cone nozzles, clog resistant nozzles, spiral spray nozzles.
- Largest free passage in the original spiral nozzle invented by BETE and continuously improved!
- Passes particles equal to orifice size
- Clog-resistant
- One-piece, extra heavy construction
- High energy efficiency
- Male connection
- Wide range of flow rates
- Fine atomization
- Common Materials:
- 316SS, Brass, Cobalt Alloy 6, Polypropylene, PTFE, PVC
-
WL Whirl nozzles
- Advanced whirl plate design produces uniform coverage
- Male and female connections
- Medium to coarse atomisation
- Common Materials:
- 303, 316, Brass, CPVC, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, Polypropylene, PTFE, PVC, PVDF
-
WTZ nozzles
- No internal parts, clog-resistant
- Uniform distribution
- Male and female connections
- Large free passage
- Common Materials:
- 303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, PVC
