Bete

  • NFD Dovetail Flat Fan Nozzles
    View Cart
    Details

    NFD Dovetail Flat Fan Nozzles

    NFD Nozzles

    • Dovetail joint guarantees alignment of interchangeable tips
    • Dimensionally compatible with standard dovetail systems
    • Tips offset 5° or 15° for overlapping spray patterns
    • Tapered overlapping spray provides uniform coverage
    • Male, female and welded connections
    • Other sizes available upon request
    Common materials
    303, 316, Brass
  • View Cart
    Details

    NFH Fan Nozzles with Tungsten Carbide Inserts

    Design Features:

    • Tungsten carbide orifice inserts for maximum wear resistance and service life
    • Male connections: 1/4” NPT, BSP (R)

    Spray Characteristics:

    • Relatively coarse atomisation
    • Uniform distribution with tapered edges for use in overlapping sprays
    Spray pattern: Flat Fan Spray angles: 0° to 120°
    Common Materials:
    303 / Tungsten Carbide
  • NFS Stubby Flat Fan Nozzles
    View Cart
    Details

    NFS Stubby Flat Fan Nozzles

    NFS Nozzles

    • Extremely short length for minimum projection and maximum clearance
    • Produces a flat fan spray pattern available in a variety of spray angles
    • Available in straight (parallel) threads only, NPSM and G
    • Requires gasket to seal connection
    Common materials
    303, 316, Brass, PVC
  • NFV Nozzles High Impact Fan Nozzles with Integral Strainer Option
    View Cart
    Details

    NFV High Impact Fan Nozzles With Integral Strainer Option

    • One-piece construction
    • No internal parts
    • Male connection
    • Low nozzle maintenance
    • Optional removable strainer for easy cleaning
    • High impact
    • Uniform distribution
    Common materials
    303, Brass, 316
  • Nozzle-Strainers-min
    View Cart
    Details

    Nozzle Strainers

    Components

    Optional strainer to fit BJ and CW nozzles. All Strainers are equipped with 316 stainless steel screens of various mesh size

    Materials

    316 stainless steel

    Sizes

    US Mesh sizes:                       
    50 297 μm  S201
    100149 μmS202
    20074 μmS203
    40037 μmS204
     
    Download SpecSheet
  • View Cart
    Details

    P Evaporative Cooling, Fogging, and Misting Nozzles

    P nozzles

    Design Features

    • High energy efficiency
    • No whirl vanes or internal parts
    • Highly efficient laminar jet impinges on target pin generating fine fog
    • Male connection

    Spray Characteristics

    • Finest fog of any direct pressure nozzle
    • Produces high percentage of droplets in the 25-400 micron range; ideal for dust suppression
    Common materials:
    303, 310, 316, 321, 347, Brass, Nickel Alloy C-276

  • PJ Nozzles Impingement, Small, Fog, and Misting Nozzles
    View Cart
    Details

    PJ Impingement, Small, Fog, and Misting Nozzles

    PJ Nozzles

    Design Features

    • High energy efficiency
    • No whirl vanes or internal parts
    • 1/8" or 1/4" male connection
    • 100-mesh screen, 20 micron paper filter or 70 micron polypropylene filter optional

    Spray Characteristics

    • Finest fog of any direct pressure nozzle
    • Produces high percentage of droplets under 50 microns
    Common Materials:
    303, 310, 316, 321, 347, Brass, Nickel Alloy C-276
  • PSR Jet, Straight Jet, and Hard Driving Straight Jet Nozzles
    View Cart
    Details

    PSR​ – Small physical Size Straight Jet

    Nozzle Features

    • Small physical size
    • Flow rates from 0.075 L/Min to 34.1 L/Min
    • Small orifice size
    • Interchangeable with most other needle-type showers
    • Hard-driving straight jet
    0-Straight-jet-min
    Download SpecSheet
  • Reducing-Bushings-min
    View Cart
    Details

    Reducing Bushings

    Components

    BETE Nozzles are often installed in pipe sizes larger than their connection. These bushings will adapt BETE nozzles to existing pipng.

    Materials

    316 stainless steel nickel alloy C-276 nickel alloy 625 PVC PTFE

    Sizes

    1/4 x 1/8 3/8 x 1/8, 1/4 1/2 x 1/8,1/4, 3/8 1 x 1/4, 3/8, 1/2, 3/4 1-1/2 x 1/4, 1/2, 1 2 x 1/2, 1
    Download SpecSheet
  • SAM-Flat-Fan-and-Round-Nozzles
    View Cart
    Details

    SAM Flat Fan and Round Nozzles

    Nozzle Features
    • Separate atomising and pattern lines.
    • Flow rates from 2.7 L/hr to 174 L/hr
    • Pneumatically controlled shut-off & cleanout
    • External mix allowing spraying of viscous fluids
    • Recirculation port
     
    Download SpecSheet
  • Bete-SAM-Air-Atomising-Automatic-Nozzles-min
    View Cart
    Details

    SAM Nozzles – External Mix Narrow Round

    Nozzle Features 

    • Separate atomising and pattern lines.
    • Flow rates from 2.7 L/hr to 174 L/hr
    • Pneumatically controlled shut-off & cleanout
    • External mix allowing spraying of viscous fluids
    • Recirculation port 
    Download SpecSheet
  • SC Nozzles Cast Metal Alloy, Metal Alloy, and Full Cone Nozzles
    View Cart
    Details

    SC Cast Metal Alloy and Full Cone Nozzles

    SC nozzles

    Design Features:

    • Complete line of full cone nozzles made in cast metal alloys
    • Internal removable vane
    • Male and female connections
    • Flanged connections available

    Spray Characteristics:

    Full Cone with uniform distribution
    Common Materials:
    316, Brass, Carbon Steel
  • SF_Snap_release_Nozzle_system-min
    View Cart
    Details

    SF Nozzles Snap Release Nozzle System

    Nozzle Features

    • Quick set-up system features special “Snap-in” tips
    • Flow rates from 1.61 L/Min to 75.6 L/Min
    • Double clamp base or adapter available for higher pressure operations
    • Quick set-up system can be provided with fan, hollow or full cone spray tips
    • Full 45° alignment of spray without tools
    Flatfan_50-min
    Download SpecSheet
  • SJ_Swivle-joint-min
    View Cart
    Details

    SJ Nozzle – Swivel Joints

    Nozzle Features

    • Adjustable swivel joints allow custom alignment of spray nozzles
    • Leak-proof design
    • Other materials available upon request
     
    Download SpecSheet
  • SA SpiralAir® (SA) Nozzles High Flow Air Atomising and Spray Drying Nozzles
    View Cart
    Details

    SpiralAir (SA) High Flow Air Atomising

    Standard Materials: 316 Stainless Steel with optional Cobalt Alloy 6 wear components. The SpiralAir can be configured to fit any installation requirement. Spray patterns: Full Cone and Flat Fan Spray angles: 20°, 60°, 90° (Other angles available by special order) Flow rates: 0.33 to 26 gpm
  • SPN High Impact Deflected Flat Fan Spray Nozzles
    View Cart
    Details

    SPN High Impact Deflected Flat Fan Spray Nozzles

    SPN Nozzles

    Design Features

    • One-piece/heavy construction
    • Straigh-through orifice minimizes clogging
    • Machined from bar stock to exacting standards
    • Male connection

    Spray Characteristics

    • Yields highest impact, narrow flat spray with least atomization
    • Spoon-shaped deflector surface efficiently forms a hard-driving spray
    Common materials
    303, 316, Brass, PTFE, PVC
  • SS-Small-Droplet-Size-Dense-Fog-Nozzles-min
    View Cart
    Details

    SS Small Droplet Size Dense Fog Nozzles

    Nozzle Features

    • Multiple flat fan patterns
    • Flow rates from 9.16 L/Min to 618 L/Min
    • Solid one-piece construction
    fog_SS-min
    Download SpecSheet
  • ST Nozzles Abrasion Resistant Full Cone Spiral Spray Nozzles
    View Cart
    Details

    ST Abrasion Resistant Full Cone Spiral Spray Nozzles

    ST nozzles

    • Designed for use with abrasive materials such as limestone slurry
    • Extensive history as a wet FGD (flue gas desulphurisation) absorber nozzle
    • Available in cobalt alloy 6 or industrial ceramic (reaction bonded silicon carbide)
    • Inherently clog resistant with no internal parts
    • The spiral design produces a spray with more developed surface area than other nozzle styles for a given flow and pressure
    • Designed by BETE, the inventor of the spiral nozzle
    • Cobalt alloy 6 or RBSC ceramic parts in high-wear areas
    • High energy efficiency
    • No internal parts
    • Clog-resistant
    • Male and female connections
    • Flanged and special connections available as required
    • Fine atomisation
  • STXP Free Passage Full Cone Spiral Spray Nozzles
    View Cart
    Details

    STXP Largest Free Passage Full Cone Spiral Spray Nozzles

    STXP Nozzles

    • Abrasion resistant
    • Cobalt alloy 6 or RBSC ceramic parts in high-wear areas
    • High energy efficiency
    • Largest free passage in spiral design
    • Extra-heavy, rugged construction
    • Male and female connections
    • Flanged and special connections available as required
    • Fine atomisation
    Common Materials:
    316 / Cobalt Alloy 6, 316 / RBSC
  • View Cart
    Details

    TC High Flow Rate – Metal Alloy and Full Cone Spray Nozzles

    TC nozzles

    • One-piece body with integral vanes
    • Male, female and flanged connections available
    • Extremely high flow rates
    Common Materials:
    316
  • Twist-Dry-TD-Hollow-Cone-Spray-Drying-Nozzles-min
    View Cart
    Details

    TD Nozzle – Twist & Dry Hollow Cone

    Patented locking mechanism for quick and easy change-out Fewer parts; rugged design: one-piece swirl unit greatly reduces breakage of tungsten carbide pieces BETE provides complimentary software support provided to customers to simplify swirl unit and orifice disk selection. Replacement swirls and discs are readily available
    Download SpecSheet
  • Low-Flow-Twist-Dry-Nozzles-min
    View Cart
    Details

    TDL Nozzle – Low Flow Twist & Dry

    Nozzle Features Patented locking mechanism for quick and easy change-out 2-piece body for easy maintenance Lower flow rates than TD series Interchangeable swirl and orifice discs for variable patterns and flow rate Ideal for small-scale applications and pilot tests Replacement swirls and discs are readily available
    Download SpecSheet
  • TF170 Ultra-Wide Full Cone Spiral Spray Nozzles
    View Cart
    Details

    TF 29-180 – Ultra Wide FireBeter

    Nozzle Features

    • Ultra-wide spray coverage very close to the nozzle
    • Flow rates from 12.3 L/Min to 355 L/Min
    • One-piece design/no internal parts
    • Excellent choice for deluge applications
    • Fine atomisation
    FullCone180-min
    Download SpecSheet
  • Spiral Spray, Fogging, Misting, and Evaporative Cooling Nozzles in a Wide Range of Flows and Angles; Full Cone Nozzles, Hollow Cone Nozzles, Misting Nozzles - non-clogging nozzles
    View Cart
    Details

    TF Spiral Spray Nozzles

    TF Nozzles: Spiral spray, fogging, misting, and evaporative cooling nozzles in a wide range of flows and angles; full cone nozzles, hollow cone nozzles, misting nozzles

    Non-clogging nozzles: TF Spiral Spray Nozzle

    • The original spiral nozzle invented by BETE
    • Also referred to as pigtail nozzles, corkscrew nozzles and/or helix nozzles
    • High energy efficiency
    • One-piece/no internal parts
    • Clog-resistant performance
    • High discharge velocity
    • Male connection standard; female connection available by special order
    • The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
    • Wide range of flow rates and spray angles
    • Fine atomisation
  • TF Fire Protection and Evaporative Cooling Nozzles Largest Free Passage, Full Cone Nozzles, Clog Resistant Nozzles, Spiral Spray Nozzles
    View Cart
    Details

    TFXP Largest Free Passage Nozzles

    TFXP nozzles

    Largest free passage, full cone nozzles, clog resistant nozzles, spiral spray nozzles.

    • Largest free passage in the original spiral nozzle invented by BETE and continuously improved!
    • Passes particles equal to orifice size
    • Clog-resistant
    • One-piece, extra heavy construction
    • High energy efficiency
    • Male connection
    • Wide range of flow rates
    • Fine atomization

    Common Materials:
    316SS, Brass, Cobalt Alloy 6, Polypropylene, PTFE, PVC
  • View Cart
    Details

    TH Right Angle and Tangential Inlet Nozzles

    TH nozzles

    • Large free passage
    • Clog-resistant; nozzles have no internal parts
    • One-piece casting
    • Female connection
    • Flanged connection available
    • U.S. Patent 4,231,524
    • Inlet and outlet are in-line
    • Most even spray distribution of any tangential whirl nozzle in the industry
    Common Materials:
    316, Brass, Carbon Steel
  • Eductor Nozzles for Clog-Resistant Agitation and Mixing
    View Cart
    Details

    TurboMix- Eductor Mixing Nozzle

    Nozzle Features

    • Effective, economical way to circulate liquids in closed or open tanks
    • Flow rates from 26.7L/Min to 12000 L/Min
    • Inherently clog-resistant
    • Nozzle operation creates a multiplying effect on fluid flow; the volume of discharge liquid will be 3-5 times greater than the motive liquid pumped
    • Cone-shaped plume
    TurboMix-TM-Eductor-Nozzles-for-Clog-Resistant-Agitation-and-Mixing_Principle_illustration-min
    Download SpecSheet
  • Tank cleaning and Clog Resistant Nozzles
    View Cart
    Details

    TW Tank Cleaning and Clog Resistant Nozzles

    TW nozzles

    • Clog-resistant spiral design
    • Energy efficient; uses less water than conventional designs
    • Compact design; fits small openings
    • Easy to maintain
    • Unique patterns that spray in opposing directions
    Common Materials: 316, A494 CW2M (cast Nickel Alloy C-276), Brass
  • UltiMist (UM) Nozzles Fogging and Misting Nozzles
    View Cart
    Details

    UltiMist (UM) Fogging & Misting Nozzles

    UltiMist (UM) nozzles

    Metal:

    • 416 stainless steel tip
    • Brass body
    • 1/8" and 1/4" sizes
    • Male or female connections
    • Integral 100 mesh strainer

    Plastic:

    • All plastic (Polyacetal) construction
    • 1/8" male connection
    • Very fine, fog-like mist
    • Produces high number of droplets under 60 microns
    Common Materials:
    Brass / 416, Polyacetal
  • WL Whirl Nozzles Low Flow, Full Cone Nozzles
    View Cart
    Details

    WL Whirl Low Flow, Full Cone Nozzles

    WL Whirl nozzles

    • Advanced whirl plate design produces uniform coverage
    • Male and female connections
    • Medium to coarse atomisation
    Common Materials:
    303, 316, Brass, CPVC, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, Polypropylene, PTFE, PVC, PVDF
  • Dry Scrubbing, Hollow Cone, and Tangential Whirl Nozzles
    View Cart
    Details

    WT Dry Scrubbing, Hollow Cone, and Tangential Whirl Nozzles

    WT nozzles

    • Conventional design using tangential whirl method of atomization
    • Right angle
    • Durable
    • Use where a circular pattern is required or in large area multiple installations where there is considerable overlapping of sprays
    • Male and female connections
    • Large free passage
    Common Materials:
    303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276
  • WTX Extended Life, Hollow Cone, and Tangential Whirl Nozzles
    View Cart
    Details

    WTX Extended Life, Hollow Cone, and Tangential Whirl Nozzles

    WTX nozzles

    • Tangential whirl
    • Oversized body for extended life
    • Male and female connections
    • Large free passage
    Common Materials:
    303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276
  • WTZ Nozzles Right Angle, Full Cone, and Clog Resistant Nozzles
    View Cart
    Details

    WTZ Right Angle, Full Cone, and Clog Resistant Nozzles

    WTZ nozzles

    • No internal parts, clog-resistant
    • Uniform distribution
    • Male and female connections
    • Large free passage
    Common Materials:
    303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, PVC
  • BETE-XA11-Nozzle-Systems-Low-Flow-Misting-and-Air-Atomizing-Nozzles
    View Cart
    Details

    XA10 / XA11

    Nozzle Features 

    • Highly atomized spray at low flow rates
    • Eight different types of sprays with interchangeable nozzle air and fluid caps
    • Internal and external mix set-ups
    • Compatible with XAAD, XAEF (pictured), XAER, XAFF, XAPF, XAPR, XASF, XASR, and XAXW spray set-ups
    Download SpecSheet
  • XAER Nozzles Air Atomising, Pressure Fed, External Mix, Round Spray Nozzles
    View Cart
    Details

    XAER Air Atomising Nozzles for High Viscosity Fluids

    XAER Nozzles

    Design features of the XAER air atomising, pneumatic, pressure fed, external mix, round spray nozzle:
    • External mix: allows spraying of viscous materials
    • Able to spray high viscosity (100+ cP) fluids which require a round spray pattern
    • Liquid flow rate is controlled only by the liquid pressure. Liquid flow rate is not dependent on the air pressure making the nozzle performance easier to control.
    • Variable atomisation
    • Narrow spray angle (10° to 30°)
    • Precise metering of the liquid flow rate
    Common Materials:
    303, 303 / 304, 316, Nickel-plated Brass, Nickel-plated Brass / 304
  • XAFF_Air Atomising, Pneumatic, Pressure Fed, and Flat Fan Nozzles-min
    View Cart
    Details

    XAFF Pressure-fed / Int.

    Nozzle Features

    • Internal mix
    • Flow rates from 5.7 L/hr to 26 L/hr
     
    Download SpecSheet
  • XAPF Nozzles Air Atomising, Pressure Fed, and Flat Fan Nozzles
    View Cart
    Details

    XAPF Air Atomising, Pressure fFed, and Flat Fan Nozzles

    XAPF Nozzles

    Design Features

    • Internal mix
    • Veryfine atomisation
    • Flat fan, wide angle spray patterns (between 80° and 90°)
    Common materials
    303, 303 / 304, 316, Nickel-plated Brass, Nickel-plated Brass / 304
  • XASF Nozzles Air Atomising and Siphon-Fed Flat Fan Nozzles
    View Cart
    Details

    XASF Air Atomising and Siphon-Fed Flat Fan Nozzles

    XASF Nozzles

    Design Features

    • Lowest flow available
    • Very fine atomisation
    • Flat fan spray pattern
    • Moderate spray angle (60° to 85°)
    • Moderate forward projection
    • Siphon-fed
  • Y-type-line-strainers-min
    View Cart
    Details

    Y-Type Line Strainers

    Components

    BETE recommends the use of strainers to minimise clogging. The 1/4" and 3/8" strainers are equipped with 0.25mm0mesh screens, while 1/2" - 2" strainers come with 0.20mm-mesh screens. Screens with mesh sizes of 0.05, 0.06, 0.13 and 0.15mm are available by special order. Screens are easily removed for cleaning. 10 var rating.

    Materials

    Bronze body with heavy-duty stainless steel wire mesh.

    Sizes

    Strainer size:1//4, 3/8, 1/2, 3/4, 1, 1-1/2, 2 Mesh Sizes.    Screen Opening 0.25mm              0.13mm 0.20mm              0.18mm 0.13mm               0.28mm 0.06mm              0.71mm 0.05mm              0.86mm
    Download SpecSheet

Title

©2023 Spray Nozzle Engineering | All Rights Reserved | T&C