Nozzle Features
- Internal mix
- Flow rates from 15.5 L/hr to 840 L/hr
- Very fine atomisation
-
-
L Nozzles
- A series of small spiral nozzles with orifice diameters of 0.04" (1.02 mm) to 0.12" (3.05 mm)
- Male connection
- Spray Pattern of the L Evaporative
- Cooling Nozzle: Hollow Cone Fog, nearly as fine as P series
- Common Materials:
- 303, 310, 316, 317L, 321, 347, Brass, Nickel Alloy C-22, Nickel Alloy C-276, PTFE
-
MaxiPass low flow (MPL) nozzles: Low flow maximum free passage full cone nozzles
- Ultimate clog-resistant design with largest free passage available in a full cone nozzle
- Two unique S-shaped internal vanes, as opposed to x-vane style nozzles, allow maximum free passage of particles
- High energy efficiency
- Easily handles dirty, lumpy liquids
- Male connections
- High reliability spray performance under the most difficult conditions
-
MicroWhirl® (MW) Nozzles atomising, evaporative cooling, misting, and fogging nozzles
- Outstanding atomization
- Rugged pinless design
- Drip-free performance
- 70 micron polypropylene filter
- Safety wire hole available
- U.S. Patent #7198201
- Minimum operating pressure 100 psi (7 bar)
- Mist at low pressure; fog at high pressure
- Common Materials:
- 303, 316, Nickel Alloy C-276
-
NCS nozzles
- Takes no more room than pipe plug, yet performs like full-size nozzle
- Small projection
- Can be used with standard pipe couplings to form female nozzle, with elbows to form right angle nozzle, or with tees or crosses for multiple installations
- Male connection
- Metal and plastic materials
- Common Materials:
- 316, A494 CU5MCuC (cast Nickel Alloy 825), A494 CW2M (cast Nickel Alloy C-276), A494 CW6MC (cast Nickel Alloy 625), A494 CX2MW (cast Nickel Alloy C-22), Brass, Duplex 2205, Polypropylene, PTFE, PVC
-
PJ Nozzles
Design Features
- High energy efficiency
- No whirl vanes or internal parts
- 1/8" or 1/4" male connection
- 100-mesh screen, 20 micron paper filter or 70 micron polypropylene filter optional
Spray Characteristics
- Finest fog of any direct pressure nozzle
- Produces high percentage of droplets under 50 microns
- Common Materials:
- 303, 310, 316, 321, 347, Brass, Nickel Alloy C-276
-
TF Nozzles: Spiral spray, fogging, misting, and evaporative cooling nozzles in a wide range of flows and angles; full cone nozzles, hollow cone nozzles, misting nozzles
Non-clogging nozzles: TF Spiral Spray Nozzle
- The original spiral nozzle invented by BETE
- Also referred to as pigtail nozzles, corkscrew nozzles and/or helix nozzles
- High energy efficiency
- One-piece/no internal parts
- Clog-resistant performance
- High discharge velocity
- Male connection standard; female connection available by special order
- The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
- Wide range of flow rates and spray angles
- Fine atomisation
-
WL Whirl nozzles
- Advanced whirl plate design produces uniform coverage
- Male and female connections
- Medium to coarse atomisation
- Common Materials:
- 303, 316, Brass, CPVC, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, Polypropylene, PTFE, PVC, PVDF
-
WTX nozzles
- Tangential whirl
- Oversized body for extended life
- Male and female connections
- Large free passage
- Common Materials:
- 303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276
-
WTZ nozzles
- No internal parts, clog-resistant
- Uniform distribution
- Male and female connections
- Large free passage
- Common Materials:
- 303, 316, Brass, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, PVC
