Nozzle Features
- Internal mix
- Flow rates from 32 L/hr to 840 L/hr
- Very fine atomisation
-
-
MicroWhirl® (MW) Nozzles atomising, evaporative cooling, misting, and fogging nozzles
- Outstanding atomization
- Rugged pinless design
- Drip-free performance
- 70 micron polypropylene filter
- Safety wire hole available
- U.S. Patent #7198201
- Minimum operating pressure 100 psi (7 bar)
- Mist at low pressure; fog at high pressure
- Common Materials:
- 303, 316, Nickel Alloy C-276
-
PJ Nozzles
Design Features
- High energy efficiency
- No whirl vanes or internal parts
- 1/8" or 1/4" male connection
- 100-mesh screen, 20 micron paper filter or 70 micron polypropylene filter optional
Spray Characteristics
- Finest fog of any direct pressure nozzle
- Produces high percentage of droplets under 50 microns
- Common Materials:
- 303, 310, 316, 321, 347, Brass, Nickel Alloy C-276
-
Nozzle Features
- Multiple flat fan patterns
- Flow rates from 9.16 L/Min to 618 L/Min
- Solid one-piece construction
-
TF Nozzles: Spiral spray, fogging, misting, and evaporative cooling nozzles in a wide range of flows and angles; full cone nozzles, hollow cone nozzles, misting nozzles
Non-clogging nozzles: TF Spiral Spray Nozzle
- The original spiral nozzle invented by BETE
- Also referred to as pigtail nozzles, corkscrew nozzles and/or helix nozzles
- High energy efficiency
- One-piece/no internal parts
- Clog-resistant performance
- High discharge velocity
- Male connection standard; female connection available by special order
- The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
- Wide range of flow rates and spray angles
- Fine atomisation
