Food and Beverage

  • View Cart
    Details

    P Evaporative Cooling, Fogging, and Misting Nozzles

    P nozzles

    Design Features

    • High energy efficiency
    • No whirl vanes or internal parts
    • Highly efficient laminar jet impinges on target pin generating fine fog
    • Male connection

    Spray Characteristics

    • Finest fog of any direct pressure nozzle
    • Produces high percentage of droplets in the 25-400 micron range; ideal for dust suppression
    Common materials:
    303, 310, 316, 321, 347, Brass, Nickel Alloy C-276

  • PJ Nozzles Impingement, Small, Fog, and Misting Nozzles
    View Cart
    Details

    PJ Impingement, Small, Fog, and Misting Nozzles

    PJ Nozzles

    Design Features

    • High energy efficiency
    • No whirl vanes or internal parts
    • 1/8" or 1/4" male connection
    • 100-mesh screen, 20 micron paper filter or 70 micron polypropylene filter optional

    Spray Characteristics

    • Finest fog of any direct pressure nozzle
    • Produces high percentage of droplets under 50 microns
    Common Materials:
    303, 310, 316, 321, 347, Brass, Nickel Alloy C-276
  • S-70_stainless
    View Cart
    Details

    S-70 Original Stainless Heavy Duty

    Features:

    • Modern and innovative engineering with premium quality parts
    • Long handle design grip for whole hand
    • Replaceable (heavy duty) renewable rubber cover placement
    • Stainless steel seat design prevents nozzle seat leakage
    • Instant water Shut-off when the trigger is released
    • Spare parts available to service gun
    Download SpecSheet
     
    Max. Pressure Max. Flow Max. Temperature
    10 BAR 37.5 l/min 93°C
    • Available in Black, Red and White
    • Available ½”, ”, ¾” ID hose barb, or ¾” GHT swivel adapter with locking ring
    • 1-year limited warranty

    NOTE: Intended for water use only. Not suitable for steam service. Can be used with Strahman steam/water mixers.

    Order Part Number Material Colour
    S-70-WH Stainless Steel White
    S-70-BK stainless Steel Black
    S-70-RE Stainless Steel Red
  • WDG S-80 original-solid-stream-heavy-duty
    View Cart
    Details

    S-80 Original Solid Stream

    Features:

    • Available in Bronze or Stainless Steel
    • Comfortable long handle design grip for whole hand placement
    • Replaceable heavy-duty rubber covers in a choice of Black, White, or Red
    • Stainless Steel seat design prevents nozzle seat leakage
    • Instant water shut-off when the trigger is released
    • Adapters available in Barbed Rigid and Swivel, and female GHT
    • Maximum working pressure is 150psi (10BAR)
    • Maximum operating temperature of 200ºF (93ºC)
     
    Download SpecSheet
     
  • SF_Snap_release_Nozzle_system-min
    View Cart
    Details

    SF Nozzles Snap Release Nozzle System

    Nozzle Features

    • Quick set-up system features special “Snap-in” tips
    • Flow rates from 1.61 L/Min to 75.6 L/Min
    • Double clamp base or adapter available for higher pressure operations
    • Quick set-up system can be provided with fan, hollow or full cone spray tips
    • Full 45° alignment of spray without tools
    Flatfan_50-min
    Download SpecSheet
  • Silvent-220-F-Adjustable-Flexblow-Hoses
    View Cart
    Details

    Silvent 220 F Adjustable Flexblow Hoses

    SILVENT’s FLEXBLOW hose is a bendable hose that keeps the desired position, even when blowing at high pressure. Since the hose can be bent to the optimal blowing angle, both noise level and air consumption can be kept to a minimum.

    New technology has provided the system with increased durability and improved bending and blowing characteristics. The hose is oil resistant and can also be used with coolants. SILVENT’s flexblow hoses are available in 6 different standard lengths, with either 1/8” or 1/4” connection. SILVENT’s 5001, 208, or 920 nozzles can be combined with the flexblow hoses. Flexblow hoses fitted with SILVENT nozzles fully meet OSHA safety requirements. Patented.

  • SJ_Swivle-joint-min
    View Cart
    Details

    SJ Nozzle – Swivel Joints

    Nozzle Features

    • Adjustable swivel joints allow custom alignment of spray nozzles
    • Leak-proof design
    • Other materials available upon request
     
    Download SpecSheet
  • Spray Chilling Nozzles
    View Cart
    Details

    Spray Chilling Nozzles

    The assembly allows installers to always have nozzles in the correct orientation.
    • Unique design from years of experience
    • Special diaphragm check valve for even opening and closing pressure
    • Low drift nozzle technology for targeted cooling & wetting
    • Various twin and single spray nozzle options available

  • ST Nozzles Abrasion Resistant Full Cone Spiral Spray Nozzles
    View Cart
    Details

    ST Abrasion Resistant Full Cone Spiral Spray Nozzles

    ST nozzles

    • Designed for use with abrasive materials such as limestone slurry
    • Extensive history as a wet FGD (flue gas desulphurisation) absorber nozzle
    • Available in cobalt alloy 6 or industrial ceramic (reaction bonded silicon carbide)
    • Inherently clog resistant with no internal parts
    • The spiral design produces a spray with more developed surface area than other nozzle styles for a given flow and pressure
    • Designed by BETE, the inventor of the spiral nozzle
    • Cobalt alloy 6 or RBSC ceramic parts in high-wear areas
    • High energy efficiency
    • No internal parts
    • Clog-resistant
    • Male and female connections
    • Flanged and special connections available as required
    • Fine atomisation
  • Twist-Dry-TD-Hollow-Cone-Spray-Drying-Nozzles-min
    View Cart
    Details

    TD Nozzle – Twist & Dry Hollow Cone

    Patented locking mechanism for quick and easy change-out Fewer parts; rugged design: one-piece swirl unit greatly reduces breakage of tungsten carbide pieces BETE provides complimentary software support provided to customers to simplify swirl unit and orifice disk selection. Replacement swirls and discs are readily available
    Download SpecSheet
  • Spiral Spray, Fogging, Misting, and Evaporative Cooling Nozzles in a Wide Range of Flows and Angles; Full Cone Nozzles, Hollow Cone Nozzles, Misting Nozzles - non-clogging nozzles
    View Cart
    Details

    TF Spiral Spray Nozzles

    TF Nozzles: Spiral spray, fogging, misting, and evaporative cooling nozzles in a wide range of flows and angles; full cone nozzles, hollow cone nozzles, misting nozzles

    Non-clogging nozzles: TF Spiral Spray Nozzle

    • The original spiral nozzle invented by BETE
    • Also referred to as pigtail nozzles, corkscrew nozzles and/or helix nozzles
    • High energy efficiency
    • One-piece/no internal parts
    • Clog-resistant performance
    • High discharge velocity
    • Male connection standard; female connection available by special order
    • The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
    • Wide range of flow rates and spray angles
    • Fine atomisation
  • TF Fire Protection and Evaporative Cooling Nozzles Largest Free Passage, Full Cone Nozzles, Clog Resistant Nozzles, Spiral Spray Nozzles
    View Cart
    Details

    TFXP Largest Free Passage Nozzles

    TFXP nozzles

    Largest free passage, full cone nozzles, clog resistant nozzles, spiral spray nozzles.

    • Largest free passage in the original spiral nozzle invented by BETE and continuously improved!
    • Passes particles equal to orifice size
    • Clog-resistant
    • One-piece, extra heavy construction
    • High energy efficiency
    • Male connection
    • Wide range of flow rates
    • Fine atomization

    Common Materials:
    316SS, Brass, Cobalt Alloy 6, Polypropylene, PTFE, PVC
  • View Cart
    Details

    TH Right Angle and Tangential Inlet Nozzles

    TH nozzles

    • Large free passage
    • Clog-resistant; nozzles have no internal parts
    • One-piece casting
    • Female connection
    • Flanged connection available
    • U.S. Patent 4,231,524
    • Inlet and outlet are in-line
    • Most even spray distribution of any tangential whirl nozzle in the industry
    Common Materials:
    316, Brass, Carbon Steel
  • Tank cleaning and Clog Resistant Nozzles
    View Cart
    Details

    TW Tank Cleaning and Clog Resistant Nozzles

    TW nozzles

    • Clog-resistant spiral design
    • Energy efficient; uses less water than conventional designs
    • Compact design; fits small openings
    • Easy to maintain
    • Unique patterns that spray in opposing directions
    Common Materials: 316, A494 CW2M (cast Nickel Alloy C-276), Brass
  • UltiMist (UM) Nozzles Fogging and Misting Nozzles
    View Cart
    Details

    UltiMist (UM) Fogging & Misting Nozzles

    UltiMist (UM) nozzles

    Metal:

    • 416 stainless steel tip
    • Brass body
    • 1/8" and 1/4" sizes
    • Male or female connections
    • Integral 100 mesh strainer

    Plastic:

    • All plastic (Polyacetal) construction
    • 1/8" male connection
    • Very fine, fog-like mist
    • Produces high number of droplets under 60 microns
    Common Materials:
    Brass / 416, Polyacetal
  • Vari-Spray™ Pre Rinse Spray Nozzle
    View Cart
    Details

    Vari-Spray™ Pre Rinse Spray Nozzle

    The low-flow pre-rinse spray nozzle with the world's best flexibility and truly superior cleaning performance.

    Vari-Spray™ pre-rinse spray nozzle provides one of the best values in the industry! Strahman's standard Vari-Spray™ is a low-flow pre-rinse spray nozzle that comes in one of two standard flow rates: 1.0 gpm or 1.25 gpm at 60 psi. The Vari-Spray™ has an infinite choice of spray patterns for optimum performance, no matter what your immediate pre-rinse needs. Tackle everything from gently rinsing fine stemware to blasting off baked-on sauce.
  • wine-racking-equipment-rack-it-teer
    View Cart
    Details

    Wine Racking Equipment Rack-It-Teer

    Filling or emptying wine from barrels by pushing with gas often draws in oxygen which needs to be purged to prevent damaging the wine; this process of purging is expensive in both time and the cost of the purging gas. With the unique expandable bung/cam locking system, the Rack-it-Teer Solid Seal System makes racking faster and uses much less purging gas, saving time and money; the Rack-it-Teer allows for the filling or emptying of 10 or more barrels to each bottle of purging gas used (Assuming use of nitrogen as purging gas and dependant upon the size of barrel used. With certain ‘T’ cylinder connections, the Rack-it-Teer can empty 18-20 barrels per cylinder of gas).
  • WL Whirl Nozzles Low Flow, Full Cone Nozzles
    View Cart
    Details

    WL Whirl Low Flow, Full Cone Nozzles

    WL Whirl nozzles

    • Advanced whirl plate design produces uniform coverage
    • Male and female connections
    • Medium to coarse atomisation
    Common Materials:
    303, 316, Brass, CPVC, Duplex 2205, Nickel Alloy 625, Nickel Alloy 825, Nickel Alloy C-22, Nickel Alloy C-276, Polypropylene, PTFE, PVC, PVDF
  • XAER Nozzles Air Atomising, Pressure Fed, External Mix, Round Spray Nozzles
    View Cart
    Details

    XAER Air Atomising Nozzles for High Viscosity Fluids

    XAER Nozzles

    Design features of the XAER air atomising, pneumatic, pressure fed, external mix, round spray nozzle:
    • External mix: allows spraying of viscous materials
    • Able to spray high viscosity (100+ cP) fluids which require a round spray pattern
    • Liquid flow rate is controlled only by the liquid pressure. Liquid flow rate is not dependent on the air pressure making the nozzle performance easier to control.
    • Variable atomisation
    • Narrow spray angle (10° to 30°)
    • Precise metering of the liquid flow rate
    Common Materials:
    303, 303 / 304, 316, Nickel-plated Brass, Nickel-plated Brass / 304
©2025 Spray Nozzle Engineering | All Rights Reserved | T&C | Privacy